Hello.
NSX Edge Interface has MTU setting place.
Is this correct in terms of the maximum MTU size when sending packets from NSX Edge?
If correct,
Is it correct in understanding below?
① Set the MTU size of the NSX Edge to 1500.
② MTU 9000 packet arrives at NSX Edge from guest OS
③ Communication routed by NSX Edge is fragmented and communicated to MTU 1500
i am receiving this error
what i have to do with this?
The Appstack capture process seems too simplified in that you hit start, make a change, hit finish, and it bundles everything up into a vmdk. I am use to tweaking packages and permissions as well as trimming the erroneous data that was captured and not needed. Is there a way to open an appstack and see the data it captured? For example mount the vmdk and see the registry keys, files/folders, etc. and then remove data that shouldn't have been captures as well as adjust ACLs etc?
I ask because our helpdesk is receiving reports of odd behavior with an application and I'm wondering if there is conflicting registry keys in an appstack being overlayed. Being able to see what's in the appstack would prove this is happening and being able to then delete the conflicting keys from the appstack would resolve the problem.
Can't start autorisation service even when i try manual it wil not start.
Error code 6000009
please help
Trying to install the 2017 Tech Preview and am getting this during the installation,
Service 'VMware Authorization Service'
(VMAuthdService) failed to start. Verify that you have
sufficient privileges to start system services.
In the event log it shows event ID 7024
The VMware Authorization Service service terminated with the following service-specific error:
%%6000009
Running Windows 10, 1703 Build 15063.483, latest updates. 12.5.7 was uninstalled and the system was rebooted twice before the install was attempted. Folder permissions have been verified. Done all the old things from the previous versions. WMI is running, UAC is off,
Will try again in a bit after I look into this more but just wanted to see if others were getting this as well.
I have removed a vsphere host , but its local datastorage still listed in vcenter, showing inactive status,
when I want to remove it,The Options are grayed, how do I remove it?
I'm not able to change the owner of a vApp using the SET_CIVAPP cmdlet. The -Owner option in SET-CIVAPP is not working. I get the following error:
Set-CIVApp : 11/9/2017 8:42:39 PM Set-CIVApp Object reference not set to an instance of an object.
CategoryInfo : NotSpecified: (:) [Set-CIVApp], CIException
FullyQualifiedErrorId : CloudImpl_UserService_GetUserForSysAdmin,VMware.VimAutomation.Cloud.Commands.Cmdlets.SetCIVApp
I'm try to query the ESXi Host advance configuration but i get the following warning.
The cmdlet still works "Get-VMHostAdvancedConfiguration -VMHost $vihost -Name Security.AccountUnlockTime"
Although wondering how would i do this with Get-AdvancedSetting cmdlet
WARNING: The command 'Get-VMHostAdvancedConfiguration' is obsolete. Use Get-AdvancedSetting cmdlet instead.
I've done some digging on this and found some old info which may have been for VMware WS 4.0. Having trouble booting in ESXi6. Here's what I done so far:
The source Solaris disk layout (2 disks sda & sdb in software raid)
root@PartedMagic:/# fdisk -l
Disk /dev/sda: 750.2 GB, 750156374016 bytes
255 heads, 63 sectors/track, 91201 cylinders, total 1465149168 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk identifier: 0x00000000
Device Boot Start End Blocks Id System
/dev/sda1 * 32130 1465127999 732547935 bf Solaris
Disk /dev/sdb: 750.2 GB, 750156374016 bytes
255 heads, 63 sectors/track, 91201 cylinders, total 1465149168 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk identifier: 0x00000000
Device Boot Start End Blocks Id System
/dev/sdb1 * 32130 1465127999 732547935 bf Solaris
1. Booted Solaris server with Partedmagic and performed a dd of the /dev/sda disk (750GB) to a remote CentOS server
dd if=/dev/sda/ conv=sync,noerror bs=128k | gzip -c ssh 192.168.3.88 dd of=/home/jargo/hservers.gz
2. Unzipped the file
pv hserver2.gz | gzip -d > hserver2
3. Converted from raw format to vmdk format
qemu-img convert -f raw -O vmdk hserver2 hserver2-flat.vmdk -p
[root@JArgo-CentOS jargo]# file hserver2-flat.vmdk
hserver2-flat.vmdk: VMware4 disk image (I'm concerned this Vmware4 disk image may only be for a VMware Workstation where I need ESXi6 format)
4. qemu-img info hserver2-flat.vmdk
[root@JArgo-CentOS jargo]# qemu-img info hserver2-flat.vmdk
image: hserver2-flat.vmdk
file format: vmdk
virtual size: 699G (750156382208 bytes)
disk size: 620G
5. Moved flat file to VM datastore, re-checked file size:
#ls -la hserver2-flat.vmdk
| -rw-r--r-- | 1 root | root | 691013419008 Nov 10 01:05 hserver2-flat.vmdk |
6. Created 'missing' vmdk descriptor file using 691013419008 / 512 to give me my RW of 1349635584 and tried geometry from vmware's vmkfstools of the flat file:
[root@MNIS-ESXi-02:/vmfs/volumes/5a01d41c-dbdbd1c1-28b1-3863bb45a2e0/hserver2] vmkfstools -g hserver2-flat.vmdk
Geometry information C/H/S is 1453521/16/63
ddb.adapterType = "lsilogic"
ddb.geometry.cylinders = "1453521"
ddb.geometry.heads = "16"
ddb.geometry.sectors = "63"
Also tried using the geometry that VMware originally gave me for the disk:
ddb.adapterType = "lsilogic"
ddb.geometry.cylinders = "84010"
ddb.geometry.heads = "255"
ddb.geometry.sectors = "63"
Cannot get this VM to boot Solaris for the life of me. Anyone that can help me please? I would be most appreciative.
I'm trying set a vsan node into Maintenance mode, I want to script a rolling reboot of all nodes in a cluster. Of course I need to build some logic to insure before rebooting subsequent nodes that the vsan is healthy but just trying to figure out the required code to actually put it into maintenance mode with the evacuate VM's and insure "ensure accessibility" option ?
vCloud Director clears the default storage policy for VMs every time you update the template. Is there a powerCLI script to reset the storage policy for VMs in a template?
I have updated to Windows 10, the new fall creator version 2017 with Fusion 10.
The display adapter list only shows Microsoft Basic Display Adapter with a max. resolution of 1152x864. This is not good enough on a retina screen.
Any help will be appreciated .)
In SRM whenever Recovery Plan History Reports are generated, these are in UTC 0. Can this report be changed in to specific time zone, Please refer the screenshot for more details.
Hello Cool People,
I was planning to renew the certificates for our vCenter server and its components using the SSL Certificate automation tool. I was just curious since when we did this 3 years ago, the files that was generated by the tool was still in the "Request" folder of ssl automation tool directory including the .pem file. I attached a screenshot below. My question and concern is that, Can this folder or files be removed from the "Request" folder? Since I need to generate a new certificate request(VMware Knowledge Base ) are the files inside these directory gets overwritten with a new files? I hope someone can shed some light and share their expertise on this matter.
Best,
Hi,
Is the vm monitoring function of vSphere HA effective even if there is only one host in the cluster?
I want to utilize only the function of restarting the vm in the same host if it hangs.
[Overview]
vCenter Server (v6.0 u2)
┗Datacenter
┗Cluster
┗ESXi#1 (v6.0 u2)
はじめまして。
vSphere HAを構成するオプションの1つである「仮想マシンの監視」機能についてご教授願いたく、
ご相談させていただいております。
vSphere HAの構成オプションである「仮想マシンの監視」機能は、
クラスタ内にESXiホストが1台の場合でも有効に働くのでしょうか？
以下のマニュアルの記述の通り、仮想マシンが何らかの原因にてハングしてしまった場合に、
同一ホスト内で再起動させるような仕組みが実現可能であるのかを模索しております。
もちろんホストが複数台存在しない為、ホスト障害時における別ホストでの再起動の機能は期待しておりません。
vSphere可用性-仮想マシンとアプリケーションの監視より引用
-----
仮想マシンの監視を有効にすると、仮想マシンの監視サービスは （VMware Tools を使用）、ゲスト内で実行される VMware Tools プロセスからの定期的なハートビートおよび I/O アクティビティをチェックして、クラスタ内の各仮想マシンが稼動しているかどうかを判断します。ハートビートや I/O アクティビティが受信されない場合、ほとんどの原因は、ゲスト OS で障害が発生しているか、VMware Tools が割り当てられていないためにタスクが終了できないというものです。このような場合、仮想マシンの監視サービスは、仮想マシンで障害が発生したと判断し、仮想マシンを再起動してサービスを回復させます。
-----
以下のような構成を考えております。
[システム概要図]
vCenter Server (v6.0 u2)
┗Datacenter
┗Cluster
┗ESXi#1 (v6.0 u2)
よろしくお願いいたします。
Requirements:
Migrate all vm's from Cluster 1 to Cluster2 in vcenter 5.5.
Cluster1
There are 8 network adapter's of 1Gbps on all host from Cluster1
2 - are using for vmotion
2 - are using for vmanagment
4 - are using for VMNetwork
All hosts are connected with DV-switch1
Cluster2
There are 2 network adapter's of 10 Gbps on all host from Cluster2
Vmotion, vmanagment and VMNetwork all are running on these two 10 Gbps
All hosts connected to this Cluster2 on DV-switch2
LACP is enabled on DV-switch2 at vcenter level and physical switch end.
Vlans are same for VMNetwork configured on both DV-switch.
Please suggest best solutions to hot migrations from Cluster1 to Cluster2?
We are rebuilding our VD environment at an alternate data center and have started utilizing Global Entitlements instead of entitling at the desktop pool level. Our goal is that we will eventually be running out of two data centers in an active-active design.
So it looks like View separates these when someone logs into the environment. I see our desktops entitled at the desktop pool level first, in alphabetical order. I then see the globally entitled pools - and they are in some randomized order that makes no sense.
Has anyone else experienced this? It makes things look sloppy on our end to the end user.
I am looking to use Enterprise Mode Site List via AD GPO in a linked clone environment running Windows 10. The goal: when a user opens Edge and attempts to navigate to a site, Windows automatically opens that site in IE 11 and close Edge.
When the user logs in, they are required to open Edge once to get the policy downloaded. Once downloaded, the next time a user opens Edge with the URL in question, IE 11 opens the URL and closes Edge as expected, but this is required to occur once during every time the user logs into a new desktop, they must repeat these steps. What they'd like to is have UEM persist the fact that Edge has received the policy and simply open the link in IE 11. We are using UEM 9.2.1, with the Edge.ini file provided on the VMTN site. We are looking for assistance on how to persist the site list downloaded by the policy. Any insights?
Hi,
Once upon a time I deployed our entire v6 PSC/VCSA environment using vcsa-deploy.exe and json config files. Wonderful.
I'm now trying to deploy using an updated version of vCenter - v6.0 Update 3b (VMware-VCSA-all-6.0.0-5326177.iso). I'm using the updated json template. I'm on Windows 10 x64 and undoubtedly a newer build than when I first used the cli installer (not sure if this makes a difference).
The error I'm getting is when deploying is:
Cannot gather support logs because the appliance could not deploy. Got error while running OVF Tool command: Deployment failed. Ovftool return error code: -1073741800
Basic verification completed successfully, so no problems reported there.
The line "See c:\users\robin\appdata\local\temp\vcsaCliInstaller-2017-11-10-12-45-oj7vbi\ovftool.log for the OVF Tool logs." is not possible, because the log doesn't exist.
Running the installer in a web browser isn't an option because I'm using Firefox and Chrome x64; Firefox tells me I need to run the installer on Windows. Chrome prompts me to install the client integration plugin (already done), then to open it, but doesn't do anything, although it did once throw the following error: "vmware-csd.exe - Application Error: The application was unable to start correctly (0xc0000018). Click OK to close the application." - Anyway I don't want to do this as it negates the benefits of using the command line.
Any ideas?
Thanks.