I'm using vRA 7.5 / vRA Plugin ITSM 5.0 / ServiceNow London.
Can we import catalog from one vRA to multi ServiceNow instance ?
I found that ServiceNow can support Multi-vRA.
Introducing the vRealize Automation Plugin for ITSM version 5.0 - VMware Cloud Management
Also I found that we can import blueprint from a vRA to another vRA.
（vRAについては詳しくないので誤解しているかもしれませんが）
However, I could not find the answer for "Can we import catalog from one vRA to multi ServiceNow instance ?" so need advice.
I'm running Fusion 10.0.1 with a High Sierra guest upgraded from Sierra. Everything seems fine so far, other than installing vmware tools has problem, complaining:
"VMware Tools can't be installed on this disk. The version of macOS is too new."
Questions:
Does Fusion 10.0.1 support High Sierra vmware tool?
If it doesn't, any timeframe when we can expect it be supported?
Thanks
Hello,
I cannot seem to find a way to change the way how the web client (6.5) opens the remote console by default. It has defaulted for the web browser but I would like to change it to VMRC. When i right click the virtual machine and select "Open Console" it open the RDP to web browser and does not let me choose the VMRC application. Any help?
Thanks in advance!
Juuso
Hi,
I have a host server that is locked up at the console and refuses SSH connection. It is pingable and all the VMs remained up. On it I have one VM left that does not allow remote access. Is there any way to cleanly shut down the VM via SSH from another host on the same cluster and shared storage, or any other way to shut it down remotely? (I shut down all the other VMs on this host that did allow remote access and re registered them on another host.)
Thanks
Hi Luc ,
can you please check the following .i want to utilize $date in out-file command so that name of the output file has date componenet in it,
can you please suggest what is the right way of doing it.
$path='C:\Users\user1\Desktop\scriptfolder'
$date=get-date
get-cluster|out-file -filepath $path\$date.txt
Hi Guys,
I am looking for a consolidated table or a comparison (not in paragraph essay forms) of the leading virtualization technologies (VMware, Microsoft, Redhat, Oracle, Citrix). Can you please share any resources? Thank you
Hi Luc,
is there any powerclicommand to find the harddrives configured to esxi host.
i wstrying to configure disk group using new-vsandiskgroup and needed cnoniccal name of hrdrives as mndatory parameters.
i used powercli 10 to configure it and i think there are some enhancements in vsancommands in powercli 11.
Unable to update the software >> ( Not connected to the update server ) please advise
Hi evryone,
My script for Performance Statistics give some errors:
I get now these erros then I run the script against only upgraded vCenter from version 5.5 to 6.0.0
Running the script against vCenter version 5.5 is totally ok.
I started to debug the Metrics for vCenter 6.0 and found these Metrics for entity "my vm [Obfuscated] ":
Get-StatType -Entity "my vm [Obfuscated] " -Start $StartTime | Sort-Object -Unique
cpu.cpuentitlement.latest
cpu.ready.summation
cpu.usage.average
cpu.usagemhz.average
disk.maxTotalLatency.latest
disk.provisioned.latest
disk.unshared.latest
disk.usage.average
disk.used.latest
mem.consumed.average
mem.mementitlement.latest
mem.overhead.average
mem.swapinRate.average
mem.swapoutRate.average
mem.usage.average
mem.vmmemctl.average
net.usage.average
sys.uptime.latest
My script contain these Metrics in a variable
$metrics = "cpu.usage.average", `
"cpu.usagemhz.average", `
"mem.usage.average", `
"mem.consumed.average", `
"disk.usage.average", `
"disk.maxTotalLatency.latest", `
"net.usage.average", `
"sys.uptime.latest"
My command in script:
$vms = "my vm [Obfuscated] "
$StartTime = "05.02.2019 08:53:57"
$EndTime = "20.02.2019 13:53:57"
$intervall = "*"
$metrics = "cpu.usage.average", `
"cpu.usagemhz.average", `
"mem.usage.average", `
"mem.consumed.average", `
"disk.usage.average", `
"disk.maxTotalLatency.latest", `
"net.usage.average", `
"sys.uptime.latest"
get-stat -Entity $vms -Stat $metrics -Start $StartTime -Finish $EndTime -IntervalSecs $intervall
We did not change the level value for Performance Statistics, the value is still 1.
Could anyone advise me to solve this problem?
Thanks and regards
Denis
NSXManager の前提条件を教えて下さい。
①ネットワークでVDSの設定は必須でしょうか。
②ホストメモリの容量が16Gとありましたが空きメモリが16Gでしょうか。
申し訳ありませんが、教えて下さい。
We have one master image and 5 snapshots are associated with it. We have single pool
Is there a way I can find out which VDI Desktop is associated with specific snapshots.
4th snapshot is corrupt, i have to go to each and every VM to recompose the VM with 5th snapshot.
Wondering if we have this information handy.
Hi ,
We are moving from a Unidesk environment to trying to get UEM / APP Stacks and Writables to all play nice together.
We are also new to Instant Clones.. Unidesk was nice as the VM's were persistent. ( at least imo ).
We had horrible issues with creating our Gold Image at the start ( Win 10 ). After trying Every Flavor of Win 10.. and removing All agents one by one and then pushing them out to an Instant Clone Pool - we found out it was the App Vol Agent that was the culprit.
As i was speaking w/ the VMware tech I told him this corruption issue didn't happen to everyone He quickly stated to delete my Writable.
This fixed the corruption issue immediately.
What's ODD was i had Nothing intentionally installed on my Writable. I simply had it attached to my machine.
All Apps were in an APP STACK.
Today I updated the GI for Cylance - disabled Defender and uninstalled OneDrive. Pushed out the update ( Win 10 had been working ok prior ).
It refused to allow me to log in - could not mount the app stacks. ( took four attempts to get an error msg )
Went ahead out of Frustration and just Deleted my Writable ( with nothing installed on it ).. and after that i could get in fine.
Apologies i don't have a lot of technical data to draw from.. i get it.. this could be Anything.
ITs just kinda weird that Deleting my not currently ( actively ) used Writable is fixing things.
When this rolls out to our users.. they probably are going to get upset if i keep deleting their C: Drive .
Sorry for the WALL-O-TXT.
thanks ,
is it possible to mix different host that each has a different number of disk groups in the same VSAN cluster?
I
Example:
Existing VSAN cluster with 3 x R640 (Only 4 drive slots, assuming 2 disk groups). Get 2 new R740XD which can have up to 32 drives slot, can have more than 2 disk group.
Let say we plan to create 4 disk groups for R740xd.
Can we join R740xd nodes into the existing R640 VSAN cluster (2 disk groups per host only)?
Thanks
Good day,
I have installed vsphere replication 8.1.1 with SRM 8.1.1 and after pairing the two sites and completing replication of indivdual VMs using vsphere replication when i try to add the VMs to a protection group I get the following error" Placeholder Create Error: Unable to find a placeholder datastore for the host/cluster DR Cluster. Any placeholder datastores registered with the SRM server that were deleted and recreated in the vCenter Server will need to be removed and re-added as a new placeholder datastore with the SRM server as well." this is after completing the mappings. I have done the following troubleshooting :
1. removed the placeholder datastores and re added them
2. restarted the vcenter servers at both sites, removed the VM protection and re added the VMs and restarted SRM services
3. restored all placeholder VMs and restarted SRM services
4. recreated the placholder restarted SRM services
But i am still faced with the same error. Any assistance with be helpful. Both SRM and vsphere replication are running on vCenter 6.7
Regards
Kaylin
Dear all
Hi
my vcenter is vCenter server 6.0 and all of my vms use vmxnet3 network adapter but sometimes my vm connection drop and had to reconnect the network adapter to solve
the problem ?
why ?
How can solve this issue ? is that related to vmware or my OS (windows server 2008/2012) ?
BR
Babak
Hi All,
There is created a sript what does the following:
1st: makes a clone VMs about the source Linux one - It is OK, no any error durint the script, clone VMs are done.
2nd: Import the IPs from the StaticsIPs.csv- It is OK, no any error during the script
3rd: create a Linux customization specification- It is OK, no any error during the script. Linux customization specification is created in the vCenter
4th: make a non persistent clone about the Linux customization specification - It is OK, no any error during the script
5th: assign the static IP to the cloned VM. It doesn't run properly.There is an error message, screen attached about it.
Could you please help me?
It is the scipt:
$vCenter="vcenter01.lab.sitea"
$vCenterUser="administrator@vsphere.local"
$vCenterUserPassword="jels0.9%"
$clone = "TestLinux"
$vmNameTemplate = “TestLinux-{0:D3}”
$vm_count = "1"
$clone = "TestLinux"
$ds = "Lab_Low"
$Folder = "LabFolder"
$Cluster = "LabCluster"
Connect-viserver $vCenter -user $vCenterUser -password $vCenterUserPassword -WarningAction 0
$vmList = @()
for ($i = 1; $i –le 2; $i++) {
$vmName = $vmNameTemplate –f $i
$ESXi=Get-Cluster $Cluster | Get-VMHost -state connected | Get-Random
write-host "Creation of VM $VM_name initiated" -foreground green
$vmList += New-VM -Name $VmName -VM $clone -VMHost $ESXi -Datastore $ds -Location $Folder
}
$staticIpList = Import-CSV C:\StaticIPs.csv
$linuxSpec = New-OSCustomizationSpec –Name LinuxCustomization –Domain labmhm.hu –NamingScheme Prefix -NamingPrefix "TestLinux" –OSType Linux –DnsServer 192.168.1.1
$specClone = New-OSCustomizationSpec –Spec $linuxSpec –Type NonPersistent
for ($i = 0; $i -lt $vmList.Count; $i++)
{
$ip = $staticIpList[$i].IP
$nicMapping = Get-OSCustomizationNicMapping –OSCustomizationSpec $specClone
$nicMapping | Set-OSCustomizationNicMapping –IpMode UseStaticIp –IpAddress $ip –SubnetMask 255.255.255.0 DefaultGateway 192.168.1.254
Set-VM –VM $vmList[$i] –OSCustomizationSpec $specClone
}
Error message is also attached during step 5th in the script
Yours assistant and coooperation is highly appreciated in this matter!
Sincerely,
Peter
Does any one know a good rental lab for individual practise?
I'm not looking for HoL type, I wish do some labs
Hello, everyone!
I would like to ask a question, our current environment uses the horizontal view 7, shared storage architecture, the experience is very poor. Now that we want to migrate to the VSAN hyper-converged architecture to improve the experience, do you have a workable approach?
Hello to all.
I usually use the Service Composer to manage my the DFW rules.
But for testing some components, it was necessary to create a separate section in the DFW partition.
After I found the section through the filter, I found that there is no possibility to add or delete rules!
If you do not use a filter, then everything is fine, you can add and remove rules.
Is this so specially made?
I am afraid to imagine what would happen if all my rules were created in sections.
They could not be managed. Manual search for the desired section is not very convenient, especially when there are many.
I installed Snow leopard sever on my macbook air using vmware fusion installed fine
Had a hard time getting the tools to installed but got it working after update snow leopard
Now everytime i go in the shared folders the vmware crashes turns off guess os and then i have to reboot
I am using vmware fusion 10.1.5
on Mac os Mojave
how do i fix this ?