Quantcast
Channel: VMware Communities : Discussion List - All Communities
Viewing all 178097 articles
Browse latest View live

vCenter 6.5 - duplicate key value violates unique constraint “pk_vpx_vm_virtual_device”

$
0
0

Hello All,


Just wanted to share an issue I had and get feedback if anyone has experienced this... new bug?


My vCenter 6.5 server was running on a host which experienced a failure... I manually recovered the failed VM's onto another host, once all VM's were back online the vCenter started to crash as soon as I tried to view the properties of a specific VM (via the Webclient) which was also on that original failed host.

 

The second the properties loaded in the webgui, vCenter would shutdown with the following error:

 

"An unrecoverable problem has occurred, stopping the VMware VirtualCenter service. Error: Error[VdbODBCError] (-1) “ODBC error: (23505) – ERROR: duplicate key value violates unique constraint “pk_vpx_vm_virtual_device"

 

I asked DR google and couldn't really find anything specific to “pk_vpx_vm_virtual_device”... has anyone experienced this one before on other versions?

 

After some investigation I linked this back to the “Host USB Device” and I managed to solve my problem. As I couldn't find anything relevant to this issue I thought I would do a simple write up about it for anyone is interested / experiences the problem.


Cheers

vMan


SAML Auth Disabled or Removed can use Horizon Apps

$
0
0

Has anyone encountered this error?

 

saml.PNG

 

 

Thanks

Kali Linux Vmware workstation 12 "Operating System Not Found"

$
0
0

     I have been having so much trouble with this. There aren't any forums (that I can find) for this problem on Kali Linux. I keep getting the error that says -

"PXE-E53: No boot filename received

 

PXE-M0f: Exiting Intel PXE ROM.

Operating System not found"

I have the "connected" and "connect at start" buttons clicked.

NVMe compartibility problem

$
0
0

Hi!

 

nvme-1.JPG

I turn on allflash vSAN cluster, I use HGST Ultrastar SN150 HUSPR3216AHP301, and vshpere shows them correct.

 

But vSAN health check shows warning.

 

nvme-2.JPG

nvme-3.JPG

nvme-4.JPG

health check shows HGST Ultrastar SN100 - it is not correct


and performance is very poor...


SN100 and my SN150 are compartible in HCL with vSAN 6.2


What should I do resolve?

Advice on maximizing the speed that vSphere can clone VMs

$
0
0

I have a cluster of VM Hosts that have dual 10Gig NICs. I have a PowerCLI script that will clone out 50 VMs one after another.  I'm using Starwind as my iSCSI storage solution.  When I clone a single VM I'm seeing 6 to 8 gigabit of traffic on my Starwind box.  If I clone two VMs at once I see 14 to 15 gigabit of traffic.

 

My question is why don't I get 14 to 15 (or better yet 20) gigabit of traffic when cloning a single VM?

 

I have the bandwidth.  If I run ATTO Disk Benchmark inside a single VM on one of my hosts, it can generate over 20 gigabit of traffic.  I assume a lot of that is hitting the Starwind cache, but at least I know a single host and the Starwind service can saturate my network bandwidth, which does not happen when cloning.

 

I know I have more storage speed since I can clone two VMs to the same iSCSI target and take only maybe a 10% hit on the storage speed.

 

Is there some advanced setting that tells vSphere not to use all the available network/storage capacity while cloning?

 

I'd appreciate any advice on maximizing the speed that vSphere can clone VMs,

 

Thanks,

 

David

vspere replication 6.1.1.1 error on vc 6.0u2

$
0
0

try to add repliction to  remote site vc , get error

 

Capture.PNG

 

if i try  reconnect to the remote vcenter site get error

Capture.PNG

i unregister and register both site no good

Linked clones doesnot complete the process keep showing this error during the process

$
0
0

Linked clones  doesnot complete the  process  keep  showing  this  error  during the process

 

I tried  in  2 differents 2  ESX  hosts  and  I keep  getting  the  same  error  please  adviseconnection server.PNGVcenter server.PNG

MouseBag with two guest systems

$
0
0

I have two guest systems and on each one I start mouseclicker. I start mousecliker on first system, then ALT+CTRL switch to second, then start cliker on second machines and its bug. Help please to stay mouse in each system dont jump in other. I record video 11 - YouTube


%SystemSystem% dll missing import

$
0
0

Hello,

 

I have captured an application but when I start it I got the error:

Missing Import C:\Windows\system32\ucrtbase.dll->kernelbase.dll:CreateProcessA

 

This dll is in the package at %SystemSystem%.

 

When I use the package entry externaldll:ucrtbase.dll then the error "shifts" to another dll.

 

Please can anyone give me a hint whats going wrong?

 

TIA

Running Packaged Applications With Thinapp 5.2 On Windows 10

$
0
0

Hi,

 

I recently upgraded the Windows 7 pro Sp1 to Windows 10 on my Dell PC and my Samsung Laptop.  I noticed the applications packaged with Thinapp 5.2 run on my laptop without any problem.  But running them on my Dell PC, I get an error message.  The only difference during the upgrading was I upgrade my Laptop while  downloading the operating system.  On my Dell PC I upgraded from an ISO  file.  For upgrading there was two options. One was you could download the ISO file first and upgrade or do upgrading while downloading.

 

Did any one experienced this?

 

Best regards   

cpu overcommit

$
0
0

on my esxi 5.5 u2 there are cpu overcommit ( 2x10 cpu and logical processors 40 ) esxi has 54 vcpu. i check the advenced setting ( i dont know what ) cpu allow wide vsmp is 0 . is there any problem on that ? any performans problem or etc... ?

 

esxi 5.5 standart license for physical 2 cpu ( unlimited cores per CPU )

Openfiler Appliance in VMware

$
0
0

I am trying to understand Openfiler concept in VMware. But could't get the clear idea for using Openfiler as Appliance in VMware. Just get this below definition about the Openfiler.

 

"Openfiler is a browser-based network storage management utility. Linux-powered, Openfiler delivers file-based Network Attached Storage (NAS) and block-based SAN in a single framework. It supports CIFS, NFS, HTTP/DAV, FTP, and iSCSI".


My Concern:

Do we need some External Hard-drive as USB or Network Connectivity to work with the Openfiler Appliance?

GIMP 2.8.18 Thinapp package crashed during launch

$
0
0

Hi All,

 

I have created Virtualized ThinApp package for GIMP 2.8.18 but it get crash every time during shortcut launch with error popup as "Program has stopped working" (screen shot is attached)

I have tried the number solutions suggested on different forum for application crash issue with GIMP like delete the user profile C:\Users\username\.gimp2.8 etc… but none of It working for Virtualize package.

 

I would like to know, whether GIMP 2.8.18 support to Virtualize application ThinApp or not ?

 

Any suggestions or input will be helpful.

Extend Trial Period

$
0
0

Hi all,

 

I am messaging to ask whether the trial period for ESXi can be extended once it has expired. Your help would be much appreciated.

 

Kind regards,

 

RocknRollTim

Windows 10 and ThinApp's created on Windows 7

$
0
0

Hello,

 

My agency is starting to migrate to Windows 10.

 

All of my ThinApp's have been created on Windows 7. Most of which were made using version 5.2.1

 

Some of the ThinApps launch normally, but some don't launch at all...with no error message.

 

Does anyone know what can be causing this? and how to correct it?

Will they have to be recreated on a Windows 10 workstation?

 

Any help is greatly appreciated!

 

Thanks!


BUg: ESXi web interface crash due to USB device problems

$
0
0

Hello , first post from a n00b here .

This happened every time i tried edit the hardware for the VM

 

Cause: TypeError: $scope.usbDevices[par].data is undefined

Version: 1.8.0

Build: 4516221

ESXi: 6.5.0

Browser: Mozilla/5.0 (X11; Ubuntu; Linux x86_64; rv:50.0) Gecko/20100101 Firefox/50.0

 

Exception stack:

 

f/<@https://192.168.1.80/ui/scripts/main.js:315:15488

f/k<@https://192.168.1.80/ui/scripts/main.js:265:23107

e@https://192.168.1.80/ui/scripts/main.js:264:5644

lf/m.defer/c<@https://192.168.1.80/ui/scripts/main.js:264:7652

and change them

Fixed by starting the VM then the offending USB device dissapeared and i could acess the settings and change them then this bug happened.

 

Cause: NS_ERROR_DOM_BAD_URI: Access to restricted URI denied

Version: 1.8.0

Build: 4516221

ESXi: 6.5.0

Browser: Mozilla/5.0 (X11; Ubuntu; Linux x86_64; rv:50.0) Gecko/20100101 Firefox/50.0

 

Exception stack:

 

uf/<@https://192.168.1.80/ui/scripts/main.js:264:28643

m@https://192.168.1.80/ui/scripts/main.js:264:26914

l/f<@https://192.168.1.80/ui/scripts/main.js:264:25664

f/<@https://192.168.1.80/ui/scripts/main.js:265:9465

Me/this.$get</k.prototype.$eval@https://192.168.1.80/ui/scripts/main.js:265:16488

Me/this.$get</k.prototype.$digest@https://192.168.1.80/ui/scripts/main.js:265:15039

Me/this.$get</k.prototype.$apply@https://192.168.1.80/ui/scripts/main.js:265:16757

.link/<@https://192.168.1.80/ui/scripts/main.js:319:20193

n.event.dispatch@https://192.168.1.80/ui/scripts/main.js:262:14412

n.event.add/r.handle@https://192.168.1.80/ui/scripts/main.js:262:11234

ThinApp virtualized applications licensing

$
0
0


I've read the following:

 

VMware ThinApp Licensing information (1006248) | VMware KB

 

and I want to be sure I understand the licensing model.  The "Per End Point" option means each application that is virtualized will count towards your license cap, correct?  If I virtualize an application with the application virtualization packager, then distribute those applications to a number of endpoints, it's those applications that count towards the license cap (as opposed to the virtualization packager instance)?

 

If that is the case, how are the licenses enforced on endpoints that are not connected to the internet? When a virtualized application (a thinned application) is executed, does it check a license server?  What happens if it can't reach said server (as in, not connected to the internet, etc.)?

 

I apologize if I've confused the concepts.  Thanks in advance for the help.

Firefox created by ThinApp 5.2.2 cannot use Ctrl+ P

Moving VMDK Virtual Disk to different folder

$
0
0

Hello,

 

Before I started my new job we were experience some issues with our file server, Server22, with CPU usage. The IT consulting company that set it up suggested it was something with the windows install, so they created a new VM named Server22 which was just the C drive and attached the Data drive from the old Server22 to the new one. In doing our data virtual disk is still residing in the Old Server22 file. I'd like to move it, but want to find the right proceedure for doing so. Is it as simple as right clicking and hitting "Move To" through the Data Store Browser? I've attached a screenshot of what I'm trying to do. I'd like to move Server22.vmdk from the Server22_1 folder to the NewServer22 folder.

 

Thanks

ESXi 6.5 HP OEM Build 4564106 Purple Screen in HP ML150 G9 Server

$
0
0

Upgraded 6.0 Build 3029758 to VMware-ESXi-6.5.0-OS-Release-4564106-HPE-650.9.6.0.28-Nov2016 build. Received following screen after a few hours of up-time.

 

Also attempted an upgrade of above build on a HP ML350 G6, without success. No purple screen, but host would not respond or allow any management connections.

 

Both servers have latest HP SPP deployed. (871790_001_spp-2016.10.0-SPP2016100.2016_1015.191)

 

Viewing all 178097 articles
Browse latest View live