does anybody have any links or documentation they can share regarding configuring RabbitMQ - preferably including cluster configuration and what is the best versions of Erlang and RabbitMQ to use?
↧
RabbitMQ
↧
how to do is better vmware horizon view upgrade from 6.0. to 7.6.1
I went to upgrade vmware horizin view from 6.0 to 7.6.1
How can i do will be better way?
I have 1composer server ,1 security server ,2 connection server
↧
↧
vsphere 6.7 LSI raid card, can't get drive status
Hi!
I have this server setup at home:
SuperMicro X10SLL-F
Intel Xeon E3-1241 v3
32GB 3CC 1600
LSI 8708EM2
2x Velociraptor 10k 300gb RAID 1
4x WD Red 2TB Raid 5
I was running Vsphere 6.0 since a long time, and I decided to go over 6.7. Installation worked fine, I have access to everything, all is working... Except 2 things:
1. I can't get my LSI 8708EM2 (detected as a 1078) to show drive status
2. Can't get my Storage Manager to access disk info or rebuild raid.
When I was on vSphere 6.0, I was able to see my drive status (and veeam one could alert me), and with my WIndows VM, I had LSI MSM and I was able to configure the raid card.
So what I did:
Install SAS driver I was using in version 6 --> not working
Installed the SMIS I had --> not working
Installed lastest SMIS --> not working
Disabled the Firewall --> not working
I have no idea what else I can do. I know it's an old card, but I got it for cheap. Any idea how can I get this fixed?
Thanks
↧
ESXI 6.7 :VMRC failed to initialize SSL session to remote host
Environment
-Server ESXI 6.7 update 1
-MacOS mojave use VMRC 10.0.3
i tried to launch VMRC, it show error.
But can launch with web console.
How to fix this problem, Please share how to me.
Thank you
ข้อความถูกแก้ไขโดย: Pemapol Thesanayothin
↧
How to remove all the available in a vCenter vms withourt providing the name of the vm, using cli command
My commands are like this, it would be really helpful if the answer is compatible with this type of command.
$vmanager_path --url https://$vcenterip/sdk --username $vcenter_username --password $vcenter_password --operation removeVM --vmName $hostname >/dev/null
↧
↧
New to vCenter - one vCenter or one per location?
Really just a lab environment for now, but hoping to deploy something one I get the hang of it.
The sites have site to site VPNs between them but the links are slow and somewhat unreliable.
Should I connect the ESXi hosts to a single vCenter instance at the main location or should I put a vCenter at each location on an ESXi host?
↧
Virtual Disk-s011.vmdk Inconsistent
I received this message when I went to boot up today, any help would be appreciated:
Disk /Users/bobcaplan/Documents/Virtual Machines.localized/Windows 10 x64.vmwarevm/Virtual Disk-s011.vmdk may be inconsistent.
I will not boot and takes be to the log off screen
↧
migrate error "the operation is not supported on the object"
Hi,
I have 3 hosts with 1 esxi 5.0, 5.5 & 6.0, vcenter has been upgraded to 6.0, error appeared "the operation is not supported on the object" when vm migrate from 5.0 to 5.5 or 6.0, any solution? Thx!
↧
Fusion Pro 11 performance with MacOS Mojave Troubles
I have been a Fusion Pro user for many years. I frequently run Debian or Ubuntu 64-bit guests on a MacOS host. Sometimes I run just one VM at a time, other times I run a few. Everything has been pretty great for the past few years ...until either MacOS Mojave or Fusion Pro 11 came along (or both). Now I'm having a really tough time.
I currently have a 2018 MacBook Pro Core i9 with 32GB RAM, a 1TB SSD and Radeon Pro 560X. I also have a 2012 iMac Core i7 with 32GB RAM and Nvidia GTX 680MX. Both run MacOS Mojave (10.14)
My iMac (and previous MacBook Pro) had been running MacOS High Sierra and Fusion Pro 10 for the past few months without issue and my new MacBook only ran Fusion Pro 10 for a few days before Fusion Pro 11 came out. It has been downhill ever since.
Both computers are now running MacOS Mojave with Fusion Pro 11 and my VMs are really hard to work with on both machines. The guests behave otherwise normally unless I let them sit idle for several minutes and then I get the spinning beach ball when trying to interact with them again. It takes anywhere from 30-40 seconds to a few minutes for the VMs to start responding to me again.
Most of the time it takes so long for them to respond that I end up force-quitting Fusion. When I open it back up, the VMs are still running and are responsive again (which I find odd because they aren't resuming; they are just still there running)... until a I let them sit idle again and then it's back to beach ball time.
I have tinkered with the guest RAM and processor settings on several different VMs. I have also tinkered with the sleep and automatic suspend settings on the guests. All to no avail. I have been running VMs like this for years with few to no problems and certainly nothing like this.
I have tried open-vm-tools and the VMWare Tools on different VMs to see if they offered any differences (uninstalling the other each time before switching). They don't help. In previous versions of Fusion I have been using open-vm-tools with great success but now it's buggy (I had to write a script to restart open-vm-tools at login in order to get the screen to resize when dragging by the corners). VMWare Tools hasn't worked for me in a long time and when I tried it again with Fusion Pro 11 I met the same lack of success. It installs fine but my screen won't resize and I can't get an actual full-screen mode to work (with VMWare Tools).
Is anyone else experiencing this slow performance with Fusion Pro 11 and MacOS Mojave combined?
If anyone has any suggestions on how I might fix the problem I'll be incredibly grateful. The situation I've got now has me wondering if I need to try falling back to Fusion Pro 10 or High Sierra. I really don't want to do that.
Thanks, in advance, for any help you can offer.
CW.
Message was edited by: ITdojo - corrected a typo.
↧
↧
vsphere upgrade from 6.5 U1 to 6.5 U2
Hi,
I am planning to upgrade vpshere 6.5 U1 to U2 which is residing on UCS 5018 chassis, Blade B200 M4 model, for that I need to use general upgrade file or customized upgrade file.
Thanks,
Senthil
↧
Authentication
Hi All,
I want to know the workaround for this issue?
Since version 6.5,until upgrading to 6.7 U1, we still encounter this issue.
Experienced in all browsers (Mozilla, Chrome, IE)
We already downloaded and installed the latest Authentication Plugin but still same issue occurs.
Thank you!
↧
How to zoom in the guest's desktop view (Scale Percent Factor) in XP Pro SP3 x32 VM
I have a VMware Workstation Pro licensed product.
I have set up a VM with WIndows XP Pro SP3 x32 .. The only problem is that when the VM is running, the icons and the rest of the desktop items are too small. My desktop resolution is 1920x1080.
I wanted to know if there is a display setting which allows me to zoom in the guest's desktop without stretch it or lower the resolution of it (also it must auto adapt when i resizing the host window). It exists?
For example, in Oracle VirtualBox there is an option called "Scale Factor" that zoom in the guest's desktop view from 100% to 200% (i would need 125% more than what VMware VM sets me up). Is not there something similar in VMware Workstation?
Otherwise there isn't a workaround to fix the guest's desktop view bigger?
I have searched a lot around but i have not found anything that can help me ..
↧
Vsan ftt=1 and maintenance
Hello,
I want to clarify some things.
On a Vsan 6.2 streched cluster 8+8+1
Each Host runs 10 vm
As FTT=1 What is the expected behavior if hosts on preferred site are placed in maintenance mode one by one.
Thank you
↧
↧
VRNI 3.8 with Standard Switch
hi
i need to use VRNI 3.8 , "Latest version " , it is supported standard switch ?
↧
Create Private VLAN failed
I want to create a pricate VLAN in my vSphere environment.
But it's failed.
What should I do?
Whether meed to physics switch configure?
↧
Error message "VC_FAULT_FATAL: Failed to receive migration" when provisioning Instant Clone after ver 7.5 & 7.6
Check the ESXI vmkernl.log that show below info
================================================
2018-10-22T21:55:36.682Z cpu4:2099462)Config: 703: "SIOControlFlag2" = 3, Old Value: 4, (Status: 0x0)
2018-10-22T21:55:36.841Z cpu1:2128369)FDS: 607: Enabling IO coalescing on driver 'deltadisks' device '3b128e-cp-parent-eb823241-7fef-4e91-a1f8-e46c8c1e899e_11-000001-sesparse.vmdk'
2018-10-22T21:55:36.881Z cpu1:2128369)FDS: 607: Enabling IO coalescing on driver 'deltadisks' device '3f1293-cp-parent-eb823241-7fef-4e91-a1f8-e46c8c1e899e_11-000001-digest-sesparse.vmdk'
2018-10-22T21:55:36.969Z cpu1:2128369)VSCSI: 3810: handle 8222(vscsi0:0):Creating Virtual Device for world 2128359 (FSS handle 4002450) numBlocks=67108864 (bs=512)
2018-10-22T21:55:36.976Z cpu1:2128369)cbrc_filter: CBRC_DigestLoad:3170: Loading digest with ID 201e 201e
2018-10-22T21:55:37.031Z cpu1:2128369)VSCSI: 273: handle 8222(vscsi0:0):Input values: res=0 limit=-2 bw=-1 Shares=1000
2018-10-22T21:55:37.031Z cpu1:2128369)Vmxnet3: 18168: Disable Rx queuing; queue size 512 is larger than Vmxnet3RxQueueLimit limit of 64.
2018-10-22T21:55:37.032Z cpu1:2128369)Vmxnet3: 18310: indLROPktToGuest: 1, vcd->umkShared->vrrsSelected: 3 port 0x500100f
2018-10-22T21:55:37.032Z cpu1:2128369)Vmxnet3: 18552: Using default queue delivery for vmxnet3 for port 0x500100f
2018-10-22T21:55:37.032Z cpu1:2128369)Hbr: 3682: Migration end received (worldID=2128359) (migrateType=7) (event=1) (isSource=1) (sharedConfig=0)
2018-10-22T21:55:37.272Z cpu4:2099019)Config: 703: "SIOControlFlag2" = 2, Old Value: 3, (Status: 0x0)
2018-10-22T21:55:37.701Z cpu5:2099463 opID=d919beb2)World: 11942: VC opID 4514397a-01-a3-d6d2 maps to vmkernel opID d919beb2
2018-10-22T21:55:37.701Z cpu5:2099463 opID=d919beb2)Config: 703: "SIOControlFlag2" = 3, Old Value: 2, (Status: 0x0)
2018-10-22T21:55:37.748Z cpu6:2128356)Migrate: vm 2128359: 4082: Setting INSTANT_CLONE info: Source ts = 7610838939670523627, src ip = <127.0.0.1> dest ip = <127.0.0.1> Dest wid = 2134442 using UNSHARED swap, unencrypted
2018-10-22T21:55:37.748Z cpu6:2128356)InstantClone: 644: 7610838939670523627 S: Starting Instant Clone migration 7610838939670523627 with leader 2128359
2018-10-22T21:55:37.750Z cpu6:2128356)Hbr: 3588: Migration start received (worldID=2128359) (migrateType=7) (event=0) (isSource=1) (sharedConfig=0)
2018-10-22T21:55:37.751Z cpu2:2128369)VSCSI: 6602: handle 8222(vscsi0:0):Destroying Device for world 2128359 (pendCom 0)
2018-10-22T21:55:38.242Z cpu0:2128369)FDS: 607: Enabling IO coalescing on driver 'deltadisks' device '5912a0-cp-parent-eb823241-7fef-4e91-a1f8-e46c8c1e899e_11-000002-digest-sesparse.vmdk'
2018-10-22T21:55:38.533Z cpu1:2128369)InstantClone: 1171: 7610838939670523627 S: Checkpoint finished.
2018-10-22T21:55:38.538Z cpu1:2128369)InstantClone: 1210: 7610838939670523627 S: Ready for destination restore!
2018-10-22T21:55:38.597Z cpu1:2134231)WARNING: Migrate: 6267: 7610838939670523627 D: Migration considered a failure by the VMX. It is most likely a timeout, but check the VMX log for the true error.
2018-10-22T21:55:38.597Z cpu1:2134231)WARNING: Migrate: 282: 7610838939670523627 D: Failed: Migration determined a failure by the VMX (0xbad0092) @0x41800e59ed3e
2018-10-22T21:55:38.597Z cpu1:2134231)WARNING: Migrate: 282: 7610838939670523627 S: Failed: Migration determined a failure by the VMX (0xbad0092) @0x41800f3059b2
2018-10-22T21:55:38.597Z cpu1:2134231)Hbr: 3682: Migration end received (worldID=2134442) (migrateType=7) (event=1) (isSource=0) (sharedConfig=0)
======================================================
Since the target VM be remove immediately after failed occurred. Any help are welcome
↧
希望能增加一个备份功能
每次系统崩盘或者软件升级之类的时候我的虚拟机表都要重新整理，因为我是做组架测试的。
工程上需要用到的软路由平台、数据库服务器、IDC服务器、缓存服务器、还有各种系统都需要测试看一下效果或可用度。
然后原来我都是做好分类的，但今 天升级成为15以后变成了这样
所以每次我要重新弄，建立分类文件夹然后再重新整理虚拟机表做分类。
做成这样
我想说的是这个东西能不能备份出来，怎么备份的因为我来回测试用到的虚拟机光系统在硬盘里面就已经 存了2TB多了求批导
↧
↧
workflow for guest partition increase_vro
Hi all,
could someone suggest if there is any inbuilt workflow in vro that extend partitions inside OS.(for example C or D drive)
also we are planning to deploy vro appliance .we have 6.5 enterprise license.is it free for this as it used to be in past.
↧
Fetching NetworkProfile associated with Blueprint catalog
How can I get Networkprofile associated/added to a Blueprint, Also How can I add existing Network profile to blueprint.
Any code snippet is appreciated
↧
REST call error found inside VRASNRequestUtil.getTemplateViaRest: Method failed: (/catalog-service/api/consumer/entitledCatalogItems/ecc38dd7-6484-462a-ab84-2e6ba14c2771/requests/template) with code: 401 - Invalid username/password combo
Good day.
Can someone help on the issue I'm facing with vRA-ServiceNow Integration?
I'm getting this error message when triggering a request from servicenow:
REST call error found inside VRASNRequestUtil.getTemplateViaRest: Method failed: (/catalog-service/api/consumer/entitledCatalogItems/ecc38dd7-6484-462a-ab84-2e6ba14c2771/requests/template) with code: 401 - Invalid username/password combo
Thanks
Joanne
↧